COMMERCIAL STEEL SECTIONAL DOORS

Double click to zoom click to zoom

ENERGY SERIES

Polystyrene Insulated Commercial Steel Doors
R-values to 9.1

These high quality, polystyrene insulated steel sectional doors provide energy efficiency and reliable service under demanding conditions, making them ideal for use in municipal buildings, warehouses and shipping dock applications, or wherever value and energy efficiency is needed.

Model Section Thickness Emboss Exterior Gauge Section Design Insulation R-Value* Air Infiltration Rating
- 25 MPH*
Tested U-Factor* Thermal Break Max Width Max Height
3220 2" Stucco 20 Flush Polystyrene 9.1 0.34 0.24 Yes 28'2" 26'0"
3213 2" Woodgrain 24 Raised Panel Polystyrene 9.1 0.34 0.24 Yes 20'2" 18'0"
3211 2" Woodgrain 24 Flush Polystyrene 9.1 0.34 0.23 Yes 20'2" 18'0"
3200 2" Stucco 24 Minor Ribbed Polystyrene 9.1 0.34 0.24 Yes 26'2" 24'0"
3155 1-3/8" Woodgrain 27 Flush Panel Polystyrene 6.5 0.40 0.28 Yes 18'2" 16'0"
3154 1-3/8" Woodgrain 27 Raised Panel Polystyrene 6.5 0.40 0.28 Yes 18'2" 16'0"
3150 1-3/8" Stucco 27 Minor Ribbed Polystyrene 6.5 0.40 0.28 Yes 18'2" 16'0"

Door Testing

* U-FACTOR: All Air Infiltration test results were achieved with standard Clopay vinyl perimeter seal.
* AIR INFILTRATION: All doors tested were solid – no windows.
* R-VALUE: Calculated door section R-value is in accordance with DASMA TDS-163
** For sizes over 32'2" wide, consult factory for specific configuration requirements.

Glass/Window Options:

Window Option 24" x 8" 
24" x 8"
(3150, 3200, 3220)
Window Option 24" x 12" 
24" x 12"
(3150, 3200, 3220)
Architectural-Series-FullView
FULL-VIEW
(3150, 3200)
Window Option 19.5" x 12" 
19-1/2" x 12"
(3154, 3155, 3211, 3213)


Glazing Material Options:

CLEAR GLASS
GRAY TINTED GLASS
BRONZE TINTED GLASS
MIRRORED GLASS*
OBSCURE GLASS
WHITE LAMINATE GLASS*
FROSTED GLASS OR ACRYLIC
CLEAR ACRYLIC
GRAY ACRYLIC
WHITE ACRYLIC
CLEAR POLYCARBONATE
BRONZE POLYCARBONATE
ALUMINUM PANEL COLOR MATCH

*Mirrored and laminate not available in 1/2"

Glass thickness available in 1/8", 1/4" and 1/2". Tri-wall polycarbonate thickness available in 1/2". Low-E available on insulated glass.

 

COLOR OPTIONS:

STANDARD WHITE
STANDARD WHITE
CHOCOLATE
CHOCOLATE
Almond 
ALMOND*
Desert-Tan 
DESERT TAN*
Sandtone 
SANDTONE*
Glacier-White 
GLACIER WHITE*
MochaBrown 
MOCHA BROWN*
Charcoal 
CHARCOAL*
btnHunterGreen 
HUNTER GREEN*
Bronze 
BRONZE*
BLACK
BLACK*
Commercial Tan 
COMMERCIAL TAN*
GRAY
GRAY*
TRINAR® WHITE
TRINAR® WHITE*
Trinar® Beige 
TRINAR® BEIGE*

* Available on select models. For more information regarding color availability, click here.

ColorBlast


Performance Options Available:

Double-end hinge
3” Track
High performance hardware features 10 gauge end hinges, heavy-duty top bracket and 3" sealed roller with 5/8" stem.
Designed to counterbalance even the largest doors, commercial torsion spring assemblies can be designed for industry standard 10,000 cycles or can be upgraded to 25,000, 50,000 or 100,000 expected life cycles. Click here for details.
windcode-W 
WindCode® reinforcement available up to W2 design pressure (DP) 14 PSF, depending on size. Doors tested 50% greater than DP.
Upgrade your standard door with industrial-grade components.

Specialty Options Available:

Mullions

carry-away
Carry-away, roll-away or swing-up mullions are available on select sizes.

Break-Away Section

break-away 
Single section and double sections available on select sizes.

Pass Door

Charcoal Pass Door 
32" wide x 80" high, max 16'2" wide section.

Safe-T-Stop™ Chain Hoist

Safe-T-Stop™ Chain Hoist 
Chain hoist copy would go here.

MODEL 3200 / 3220

CUTAWAY-COMM-ES-3L-2-EPS-STCO-TG


Section Design/Emboss: (3200) 2" thick stucco embossed minor ribbed steel exterior skin pattern
(3220) 2" thick stucco embossed flush steel exterior skin pattern
Steel Gauge: (3200) 24 gauge exterior; 27 gauge interior
(3220) 20 gauge exterior; 27 gauge interior
R-Value*: 9.1
Limited Warranty: 10-year paint / 5-year delamination / 1-year material & workmanship / 5-year ColorBlast® / 1-year hardware
Joint Design: Tongue & groove section joint for strength and durability
Insulation: Expanded polystyrene foam
Air Infiltration*: 0.34
U-Factor*: 0.24
Standard Hardware: • 14 gauge hot-dipped galvanized steel hinges
• Commercial 10 ball steel rollers with options for nylon tire rollers
• 10,000 cycle torsion springs
• Steel step plate and lift handle for easy operation
• Inside slide lock for increased security
• 19 gauge steel backup plates for hinge reinforcement
• 18 gauge single end stiles or 16 gauge double end stiles
• Aluminum bottom weatherseal retainer
• PVC vinyl bottom weatherseal
• Galvanized aircraft cables with 7:1 safety factor
• 2" or 3" track in a variety of configurations to meet building design requirements

MODEL 3211 / 3213

CUTAWAY-COMM-ES-3L-2-EPS-STCO-TG
Section Design/Emboss: (3211) 2" thick woodgrain embossed flush steel exterior skin pattern
(3213) 2" thick woodgrain embossed raised steel exterior skin pattern
Steel Gauge: 24 gauge exterior; 27 gauge interior
R-Value*: 9.1
Limited Warranty: 10-year paint / 5-year delamination / 1-year material & workmanship / 5-year ColorBlast® / 1-year hardware
Joint Design: Tongue & groove section joint for strength and durability
Insulation: Expanded polystyrene foam
Air Infiltration*: 0.40
U-Factor*: 0.28
Standard Hardware: • 14 gauge hot-dipped galvanized steel hinges
• Commercial 10 ball steel rollers with options for nylon tire rollers
• 10,000 cycle torsion springs
• Steel step plate and lift handle for easy operation
• Inside slide lock for increased security
• 19 gauge steel backup plates for hinge reinforcement
• 18 gauge single end stiles or 16 gauge double end stiles
• Aluminum bottom weatherseal retainer
• PVC vinyl bottom weatherseal
• Galvanized aircraft cables with 7:1 safety factor
• 2" or 3" track in a variety of configurations to meet building design requirements

MODEL 3150 / 3154 / 3155

CUTAWAY-COMM-ES-3L-2-EPS-STCO-TG
Section Design/Emboss: (3150) 1-3/8" thick stucco embossed minor ribbed steel exterior skin pattern
(3154) 1-3/8" thick woodgrain embossed raised steel exterior skin pattern
(3155) 1-3/8" thick woodgrain embossed flush steel exterior skin pattern
Steel Gauge: (3150) 27 gauge exterior; 27 gauge interior
(3154/3155) 27 gauge exterior; 29 gauge interior
R-Value*: 6.5
Limited Warranty: 10-year paint / 5-year delamination / 1-year material & workmanship / 5-year ColorBlast® / 1-year hardware
Joint Design: Tongue & groove section joint for strength and durability
Insulation: Expanded polystyrene foam
Air Infiltration*: 0.40
U-Factor*: 0.28
Standard Hardware: • 14 gauge hot-dipped galvanized steel hinges
• Commercial 10 ball steel rollers with options for nylon tire rollers
• 10,000 cycle torsion springs
• Steel step plate and lift handle for easy operation
• Inside slide lock for increased security
• 19 gauge steel backup plates for hinge reinforcement
• 18 gauge single end stiles or 16 gauge double end stiles
• Aluminum bottom weatherseal retainer
• PVC vinyl bottom weatherseal
• Galvanized aircraft cables with 7:1 safety factor
• 2" or 3" track in a variety of configurations to meet building design requirements

*Calculated door section R-value is in accordance with DASMA TDS-163.
ModelsBIMShop DrawingSpecificationLiterature(PDF)Instruction Manual(PDF)Warranty
Three Layer - Polystyrene - 1-3/8 inch
Model 3150 – micro-groove, 27 gauge PDF IconDWG IconDXF IconDOC IconPDF IconRTF Icon3150 BrochureInstallation ManualPDF Icon
Model 3154 – Raised panel, 27 gauge PDF IconDWG IconDXF IconDOC IconPDF IconRTF Icon3150 BrochureInstallation ManualPDF Icon
Three Layer - Polystyrene - 2 inch
Model 3200 – micro-groove, 24 gauge PDF IconDWG IconDXF IconDOC IconPDF IconRTF IconExtended 8-Year Hardware WarrantyInstallation ManualPDF Icon
Model 3213 – Raised panel, 24 gauge PDF IconDWG IconDXF IconDOC IconPDF IconRTF Icon3213 BrochureExtended 8-Year Hardware WarrantyInstallation ManualPDF Icon
Model 3220 – flush, 20 gaugeRFA IconPDF IconDWG IconDXF IconDOC IconPDF IconRTF Icon3220 BrochureExtended 8-Year Hardware WarrantyInstallation ManualPDF Icon
 

Click on appropriate icon to download
To use the Spec Wizard, click here


Track and Jamb Drawings
dwgdxfpdf
Standard Track
Standard Track Follow the Roof Track
Low Headroom–Rear Mount Track
Low Headroom–Front Mount Track
High Lift Track
High Lift Follow-the-Roof Track
Vertical Track
Jamb Details
Collection Series Style Design/Model Max Width Max Height Construction Colors